|
|
Servida
Products  Peripherals
Servida has a vast amount of peripherals that allow
the Servida Motor to expand its function and capability. Expansion
cards allow for:
| • |
Ease-of-use
or wiring I/O and allows the user to interface with other commercially
available I/O blocks and accessories. |
| • |
The
user to significantly expand the points of I/O for the Servida
Motor and provide 24V optically isolated channels over an RS485
network. |
| • |
A
single master system to communicate with up to 8 Servida Motors
simultaneously without the loss of bandwidth typical of daisy
chain propagation. |
| • |
Communication
adapters to convert an RS232 signal to an RS485 network either
integrated into the D-sub connector or the serial terminal of
the PC. |
| Expansion
Modules |
DINIO7
|
The
DINIO7 is a DIN rail mount adapter that allows the Servida™
Motor to easily interface to popular Input/Output blocks
like those produced by manufacturers such as Gordos, Grayhill,
OPTO-22 and others. |
| DINIO-RS485 |
The
DINIO-RS485 is a DIN Rail Mount, 16 channel (8 inputs
and 8 outputs) 24V optically isolated, field addressable,
expanded Input/Output board. |
| DIN-RS232 |
The
DIN-RS232 is a DIN rail mount breakout for Servida™ Motor's
RS232 communications. It allows a single master to communicate
with up to eight Servida™ Motors over RS232 without the
loss of bandwidth typical of daisy chain propagation.
|
| OPTO1 |
The
OPTO1 interfaces directly into industry standard 16 channel
Opto racks allowing easy expansion into your machine design.
This Adapter Card plugs into the industry standard I/O
Module Rack such as OPTO22™, making the Servida™ Motor
control the industry standard I/O module. |
| DIO-100 |
The
DIO-100 is an eight-bit input or eight-bit output TTL-level
digital Input/Output device for use on the AniLink™ bus.
The DIO-100 can also be used as an interface to many parallel
communication devices such as absolute encoders, PLC's
or custom control systems. |
|
| Communication
Adapters |
| D15IOHSABLIM |
The
D15IOHSABLIM converts an external differential encoder
signal to a single-ended signal that the Servida™ Motor
can accept into ports A and B. It converts a 24V input
into a 5V TTL signal for ports C and D. |
| RS232485 |
The
RS232485 is designed to take RS-232 from a standard PC
COM port and convert it to RS485. It incorporates the
adapter into a 9 pin, D-sub backshell. |
| RS485-ISO
|
The
RS485-ISO is designed to take RS232 from the communications
port of the Servida Motor and convert it to RS-485. It
incorporates the adapter into a 7 pin, 7W2, D-sub backshell.
|
|
| Character
Displays |
|
|
|
|
