|
This
Adapter Card plugs into the industry standard I/O Module Rack such
as OPTO22™, making the Servida Motor control the industry standard
I/O module. The Adapter receives a DIN or DOUT command from the
Servida Motor on the AniLink™ port and controls up to 16 digital modules
on the rack as a group of 8 inputs or outputs. Each unit takes up
2 AniLink™ addresses (4 units max per motor).
The adapter operates on +5 VDC that can be supplied by the Servida Motor
through AniLink™ connection. The logic sides of the I/O modules
on the rack must of +5 VDC. The adapter card does not support I/O
modules that require more than 25 mA of input current.
If other peripherals are drawing current from the Servida Motor and
there is no room for the Servida Motor to supply +5 VDC for the rack,
the user must ensure that the Servida Motor powers-up simultaneously
with the rack power supply or earlier. If the rack powers up first,
the device on the OPTO1 adapter may latch up, losing communication
with the Servida Motor.
Features
•
Addressable expanded I/O interface
card.
•
Plugs into 50 pin header or edge card
type Opto-Racks.
•
4 Opto-1 boards per motor gives you
64 channel expansion.
• Ties in with all other AniLink™ family devices.
Benefits
•
Up
to 4 OPTO racks can be controlled by 1 SV.
•
Easy installation.
•
Easy expandability.
•
Broad compatibility.
Mechanical:
Dimensions: see figure
Weight: 15 oz (425 g)
|
OPTO1