|
Each
DINIO-RS485 has 2 RJ-45 connectors as well as screw terminal access
to allow easy connection of up to 102 blocks (816 inputs and 816
outputs) on a given RS-485 network. Communications are via standard
PRINT1 commands on Com Port 1 of any Servida
or SerMotion Motor.
Capabilities include:
•
Read an individual input (0 through 815) state
•
Read an individual output state
•
Set an output state to “ON” (sourcing) or
“OFF.”
•
Read all inputs and outputs on all Input/Output
cards present
•
Responses are global and are received by any
and all Servida and SerMotion Motors on the RS-485 network.
•
Selectable byte wide responses to array variables.
•
Selectable single bit/channel responses to
the variable z.
These capabilities allow for convenient event driven coding where
only a specific input event is needed to trigger some other event
across any Servida
or SerMotion Motor on the bus.
Features
•
8 Inputs, sink/source user selectable.
•
8 overload protected sourcing outputs.
•
+24 and/or ground rail connections on each
channel.
•
LED Indications include over-load fault, sink/source
selection,
and Input/Output channel status.
•
Feed-thru Bus.
Benefits
•
Byte
read capability.
•
Byte
write capability.
•
Input/Output
devices are easily and conveniently wired.
•
Diagnostics
at a glance.
•
Compatible
with other Servida DIN-rail mount bus products.
Electrical:
Module
input voltage: 12V to 30VDC
Module
input current: 200 mA with no outputs active
Nominal
input current: 5.7 mA @ 24V
Max
output current: 200 mA/channel or 650mA total
Mechanical:
Dimensions: see figure
Weight: 15 oz (425 g)
|
DINIO
RS485