Servida Products      Cables CBLIO43-52, CBLDC1, CBLAC110-10,
                                          CBLSVYPWR-T and CBLAC1

The CBLIO43-52 cable allows user to use the Servida Motor’s 5VDC TTL I/O to interface with 24VDC I/O. It can be used either as four inputs and three outputs or five inputs and two outputs. Each I/O is bipolar and optically isolated. The cable goes into the Servida Motor’s DB15 connector and connects to all seven Servida Motor I/Os. All electronics are built inside the connector to save space. This CBLIO43-52 cable will allow the user to interface a PLC or a mechanical relay with the Servida Motor without messy wiring. The flying lead cable comes in 2 standard sizes, 5 or 10 meters (16ft or 33ft) which is identified with the suffix –5m or – 10m, respectively.

The CBLDC1 is a 2 wire, power supply cable. It provides connection between the PS-Series power supply and voltage clamp shunt models SHUNT42V100W and SHUNT42V200W.

The CBLAC110-10 and CBLAC200-10 are 10 ft (3m) AC power cables for series SV42 and SV56 Servida Motors. The CBLAC110-10 is 110V, 3 phase and the CBLAC200-10 is 208/220/230V, 3 phase rated.

The CBLSVYPWR-T is a Y configuration power cable. It routes power from one PS-Series power supply to 2 standard Servida Motor communication cables.

CBLAC1 - AC line cable to PS-Series power supply.