 |
CBLSVI
The standard cable that is used for the Servida Motor
is the CBLSV1-10. It is 3 meter, Y configuration cable
that supplies both power and communications to the Servida
Motor. Using D-sub connectors, one lead extends to the
serial port of the PC, the other to D.C. power and the
final to the Servida Motor. The CBLSV2-10 is an equivalent
cable in an RS485 network configuration. |
CBLSV2
Similar
to the CBLSVI, except in RS485 configuration.
|
 |
CBLSVA1
This
is the standard cable for AC Power, SV42 Servida Motors.
|
|
CBLPWRCOM
Both the CBLPWRCOM and the CBLIO are cables that combine
power and communications, but with "free or flying leads"
for wiring to various peripherals and terminal blocks
supplied by other manufacturers. |
|
CBLIO
The
CBLIO is a communications cable that has a 15 pin D-sub
connector in one end and "flying leads" in the
other end. |
|
CBLIO43-52
The CBLIO43-52 cable allows user to use the Servida Motor's
5VDC TTL I/O to interface with 24VDC I/O. It can be used
either as four inputs and three outputs or five inputs
and two outputs. Each I/O is bipolar and optically isolated.
For motors that have the DE, Drive-Enable option, the
appropriate cable would be the CBLIO43-52DE. |
|
CBLDC1
The
CBLDC1 is a 2 wire, power supply cable.
|
 |
CBLAC110-10
This
is a power and communications cable for SV42 Servida Motors.
|
 |
CBLSVYPWR-T
This
cable is a "Y" style cable that splits power
from one power supply to 2 connections.
|
|
CBLAC1
The
CBLAC1 is an AC line cable to the PS-Series power supply.
|
Cables
and Connectors
